Isn’t it a better way to relax and enjoy some new TV show? But the worst thing you face is the “No signal message” that appears on your TV while watching your favorite TV program. You may wonder and get frustrated to know why my TV is not working? It may happen due to many common aerial problems. Always contact your local TV antenna repair in Brisbane, who can assess the situation and recommend the best course of action.
Check the aerial cable is connected
Sometimes the aerial had fallen out and disturbed the TV reception system. The most common reason is that the cables or connectors have been pulled out or the pets tugged the leads. So check to know whether the aerial cable is connected correctly. If you find there is a loose cable, then plug this in if you can!
Don’t use the wrong source or wrong input
Using the wrong button is probably the most common thing people use, and no signal information on the TV. It doesn’t mean that you have no TV aerial signal! Using the sound source associated with the input leads you to receive the best signal. But it is a very fast & easy fix for the HDMI or DVD player connected to it.
No power to an amplifier or switched off power supply
You should check to ensure that the amplifier is switched on as it is very common to be switched off. Make sure that the aerial input and output are attached accurately. If you turned off the TV signal, you should re-tune it because you may have deleted all of the stored services. Fortunately, modern TVs have made this very easy for you.
Faulty fly-lead or aerial cable
If you have a TV aerial wall-plate or wall jack and fly-lead, then you have a lead connecting to the antenna socket to your TV or set-top box. It can develop a fault and cause an imperfect picture or no signal. The aerial down lead is the cable that connects between your TV aerial/ antenna and your TV itself. To fix the issue, use good quality coaxial cable, coaxial plugs, and quality hand tools like splitters, amplifiers, filters, or wall-plates. Improper installation techniques can cause breaks in the line.
Faulty TV
Some TV sets didn’t work as they should have! If your TV has gone faulty, it would recommend repairing or replacing it before calling a TV antenna repair in Brisbane.
Faulty amplifier/ distribution equipment
The aerial, cable, amplifier, or booster are few potential parts of your TV system that enable you to watch your best TV shows without interruptions. If you live in a weak signal area or have a TV aerial feeding multiple TVs, you have a TV aerial amplifier or booster installed somewhere in your system. Any fault in it can ruin your TV signal. Call an expert TV antenna repair in Brisbane to handle the situation.
Conclusion
There are lots of things that can cause you to lose your TV signal. For example, pixilation or loss of picture, flicking TV picture, and rolling bar can happen to your TV. All such things happen due to faulty TV aerial. Call the specialized TV antenna repair in Brisbane that helps you find the precise reasons why your TV aerial or antenna is not working correctly and perform the things to get it working again.
Author’s bio
This article is written by Express Antenna Services- a well-known TV antenna repair company in Brisbane dedicated to providing the best possible solutions to improve your television entertainment needs.